Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9294507
| No.9294507
- Product Categories
- Friendly Links
| Information Name: | Shijiazhuang blending machine |
| Published: | 2013-03-08 |
| Validity: | 180 |
| Specifications: | Shijiazhuang blending machine |
| Quantity: | 0.00 |
| Price Description: | |
| Detailed Product Description: | Shijiazhuang blending machine, is the use of appropriated material leaves the vortex of high-speed operation, the plastic pellets (or resin powder) high-speed rollover crash friction heat, while the material in the mixing moisture from the exhaust pipe fast evaporation to dry purposes, The results are satisfactory. Shijiazhuang blending machine features: 1, the set temperature, time control in one convenient setting of various parameters. 2, reasonable structure, easy to operate. 3, stainless steel liner, shell, easy to clean. 4, double insulation device. 5, the sealing chamber stirring, can be magnetized impurity separation. 6, overload protection. Shijiazhuang blending machine features: 1, four vertical design, small size, easy to move; 2, equipped with cycloid gear motor, low noise, durable; 3, Fast complete mixing, low energy consumption, high efficiency; 4, lid, bottom of the barrel stamping molding, with the precise, more durable; 5, the timer can be selected between 0-30 minutes mixing time. Shijiazhuang blending machine operating procedures, the beginning of the school year point inspection: 1, check whether the mixing blades loose lubrication is good. 2, boot idling, check whether the abnormal noise and other anomalies, make sure everything is normal before work boot. Check the mixing tube with or without foreign body is clean. 4, check the safety switch is flexible and effective. Safe operation: 1, formula measure and the number of different kinds of materials according to process requirements added to the blending machine. 2, covered, in order to start the motor and stir in accordance with the stipulated time. 3 Do not grasping the material reaches into a blending machine during operation, view, should be shut down. For the clean-up machine, you should cut off the power before the operation. Stop operation: 1, after the shutdown should shut the machine power off under GFCI to cut off the power supply in order to undergo. 2, after the shutdown, should be thoroughly clean, especially the parts rotate relative to each other, there is no accumulation of dust. |
Admin>>>
You are the 11644 visitor
Copyright © GuangDong ICP No. 10089450, Shijiazhuang Little Giant Mold Manufacturing Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 11644 visitor
Copyright © GuangDong ICP No. 10089450, Shijiazhuang Little Giant Mold Manufacturing Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility

